IPEmotion PlugIns

IPETRONIK PlugIns

  • PlugIn:

    IPETRONIK-CAN

    Version: 01.16.00
    Beschreibung:
    Configuration and data acquisition (TEDS, Strain, ICP, Volt, High Voltage, mA, RTD, TC, DIO, PWM, Encoder) of the IPETRONIK CAN modules.
  • PlugIn:

    IPETRONIK-LOG

    Version: 03.60.00
    Beschreibung:
    Configuration and data acquisition for all IPETRONIK data logger series and add on modules like: Video Extender, FlexRay Extender, COM gate etc…
  • PlugIn:

    IPETRONIK-X

    Version: 02.06.00
    Beschreibung:
    Configuration and data acquisition using IPETRONIK X-LINK and CAN devices. (TEDS, Strain gage, ICP, Voltage, Current, RTD, TC, DIO, PWM, Encoder) Firmware requirements: X-Series V2.x, M-Series V4.0 Vendor IPETRONIK GmbH & Co. KG

Other PlugIns

PlugIn Version Beschreibung Links
BECKHOFF 01.05.00 Configuration and data acquisition of Beckhoff TCP/IP field bus couplers with K bus terminals. Interfacing to TwinCAT PLCs based on EtherCAT EL-terminals is also supported. Vendor: IPETRONIK GmbH & Co. KG PlugIn anzeigenHerunterladen
CAETEC dataLog PlugIn 15.10.00 Das CAETEC dataLog PlugIn unterstützt die Gerätekonfiguration mit IPEmotion. Es können die CAETEC Datenlogger der Produktlinien µCROS und ARCOS 1.5 über IPEmotion eingerichtet werden. Herausgeber: IPETRONIK PlugIn anzeigenHerunterladen
CAN-Acquisition 01.06.00 Direct data acquisition from ECU (Electronic Control Unit) via CAN bus. The signal configuration files are imported to IPEmotion via CANdb or Autosar files. CANdb and XML CANdb exports are supported, as well. Vendor: IPETRONIK GmbH & Co. KG PlugIn anzeigenHerunterladen
CAN-Send 01.02.00 Sending CAN message to stimulate CAN controllers and ECUs, or other software packages suitable for CAN communication. Configuration via .DBC and Autosar files. Vendor: IPETRONIK GmbH & Co. KG PlugIn anzeigenHerunterladen
Dataforth 01.02.04 Configuration and data acquisition of the MAQ20 COM4 interface including all IO modules. The supported device interfaces are USB and Ethernet TCP/IP. Vendor: Dataforth Corporation PlugIn anzeigenHerunterladen
Demo-Signals 01.05.00 Generating different wave forms. Suitable for software demos without any DAQ hardware. Vendor: IPETRONIK GmbH & Co. KG PlugIn anzeigenHerunterladen
EASYBus 01.05.03 Data recording with the Easybus devices from Greisinger. Vendor: IPETRONIK GmbH & Co. KG PlugIn anzeigenHerunterladen
ETH 01.01.00 Send and receive ASCII data records via the UDP or TCP protocol. The specific AK protocol for the data communication to MAHA Roller test benches is also implemented. Vendor: IPETRONIK GmbH & Co. KG PlugIn anzeigenHerunterladen
Excel Add-In 04.00.00 The IPEmotion Excel Add-In is an Add-In to Microsoft Excel 2010 and later versions. It allows to open IPEmotion IAD files with Excel directly. The Excel table fills with the channel information and channel values contained in the IAD file. Vendor: IPETRONIK GmbH & Co. KG PlugIn anzeigenHerunterladen
GANTNER-INSTRUMENTS 01.00.15 Device configurations can be automatically detected. To modify the device configuration, the testCommander software is needed. Vendor: Gantner Instruments GmbH PlugIn anzeigenHerunterladenVideo
Goldammer 01.01.00 Data acquisition boards for dynamic applications. The boards support many real-time functions with one exception of the on board FFT calculation. Automatic Hardware detection is implemented. Vendor: Goldammer GmbH PlugIn anzeigenHerunterladenVideo
GPS 01.05.00 Recording GPS data based on the NMEA standard protocol. Vendor: IPETRONIK GmbH & Co. KG PlugIn anzeigenHerunterladen
HBM-QuantumX 01.00.00 Configuration and data acquisition of the 8-channel universal signal conditioning unit for Current, Volt, RTD, Thermocouple and Strain Gauge measurement. Vendor: IPETRONIK GmbH & Co. KG PlugIn anzeigenHerunterladen
INNOVA-Gas-Monitor-1412 01.00.00 Data recording of CO2, flow and temperatures from the photo acoustic gas monitor device. Vendor: IPETRONIK GmbH & Co. KG PlugIn anzeigenHerunterladen
IOtech 01.00.01 Device configuration and data acquisition of DaqBook 2000 series devices and IO modules. The PlugIn also requires the IOtech DATACom device driver. Vendor: IPETRONIK GmbH & Co. KG PlugIn anzeigenHerunterladenVideo
IPEsensors 01.01.00 Configuration and data acquisition with IPETRONIK CAN bus devices IPElambda and IPEspeed. PlugIn anzeigenHerunterladen
IPETRONIK-CAN 01.16.00 Configuration and data acquisition (TEDS, Strain, ICP, Volt, High Voltage, mA, RTD, TC, DIO, PWM, Encoder) of the IPETRONIK CAN modules. PlugIn anzeigenHerunterladen
IPETRONIK-FlexRay-Extender 01.00.00 FlexRay Signal Messung mit dem IPETRONIK FlexRay Extender. PlugIn anzeigenHerunterladen
IPETRONIK-LOG 03.60.00 Configuration and data acquisition for all IPETRONIK data logger series and add on modules like: Video Extender, FlexRay Extender, COM gate etc… PlugIn anzeigenHerunterladen
IPETRONIK-X 02.06.00 Configuration and data acquisition using IPETRONIK X-LINK and CAN devices. (TEDS, Strain gage, ICP, Voltage, Current, RTD, TC, DIO, PWM, Encoder) Firmware requirements: X-Series V2.x, M-Series V4.0 Vendor IPETRONIK GmbH & Co. KG PlugIn anzeigenHerunterladen
NI-DAQmx 01.01.00 Channel configuration and data recording of the National Instruments USB DAQmx devices. Automatic hardware detection via USB interface is supported. The DAQmx device driver library is also needed. Vendor: IPETRONIK GmbH & Co. KG PlugIn anzeigenHerunterladenVideo
OPTRIS 01.00.00 Integrating OPTRIS PI infrared thermal imaging cameras. PI Series: 160, 200, 400, 450, 640. PlugIn is licensed. Vendor: PMR Handels GmbH PlugIn anzeigenHerunterladen
OSRAM OPC 00.00.05 Integration of variables (reading and writing) with the OPC DA interface. The PlugIn operates as OPC slave. PlugIn is licensed. Vendor: LEDVANCE PlugIn anzeigenHerunterladen
PLIN 02.01.00 LIN bus measurement with configuration as master, slave or listener. Signals are imported via .LDF description file. Vendor: IPETRONIK GmbH & Co. KG PlugIn anzeigenHerunterladen
PROFIBUS 01.01.00 Access to the Profibus PLC network where the PlugIn can perform its actions as master or slave. Vendor: IPETRONIK GmbH & Co. KG PlugIn anzeigenHerunterladen
Protocols 01.08.00 Data acquisition from ECU based on XCP, CCP, KWP and GM-LAN protocol. This PlugIn is supporting the standardized measurement of OBD-2 (On Board Diagnostic) signals, as well. Vendor: IPETRONIK GmbH & Co. KG PlugIn anzeigenHerunterladen
SCALES 01.00.00 Serial communication to weighing devices. Vendor: IPETRONIK GmbH & Co. KG PlugIn anzeigenHerunterladen
Serial 01.01.00 Reading data from any serial devices. The PlugIn provides the framework for ny devices specific DLL to handle data communication. Vendor: IPETRONIK GmbH & Co. KG PlugIn anzeigenHerunterladenVideo
SIEMENS-PLC 01.05.00 Access to Siemens S7 automation systems though different interfaces. Configurations can be created by importing *s7p project files in order to select the variables of interest. Vendor: IPETRONIK GmbH & Co. KG PlugIn anzeigenHerunterladenVideo
Sound 01.02.00 Recording the sound signal from the PC microphone. Vendor: IPETRONIK GmbH & Co. KG PlugIn anzeigenHerunterladen
Status 01.00.00 Recording of single process variables and system variables such as CPU load and storage. Vendor: IPETRONIK GmbH & Co. KG PlugIn anzeigenHerunterladen
Technikmedia-ATMEL 01.01.02 The PlugIn supports data communication to the analog and digital processor IOs together with the ATMEL program. Vendor: IPETRONIK GmbH & Co. KG PlugIn anzeigenHerunterladenVideo
Technikmedia-AvrNetIO 01.00.02 Experimental board from Pollin with an Ethernet interface. The K8 relay card with all IOs is included in the PlugIn. Vendor: IPETRONIK GmbH & Co. KG PlugIn anzeigenHerunterladenVideo
Technikmedia-MODBUS 01.01.12 Interfacing any Modbus device using either RTU (serial) or TCP (LAN) interfaces. Supporting many function codes for setting and reading registers. PlugIn is licensed. Vendor: Technikmedia Ingenieurbüro PlugIn anzeigenHerunterladen
Velleman 02.01.00 K8055 / VM110N evaluation board. Automatic hardware detection over the USB port. All IO functions are supported. Vendor: IPETRONIK GmbH & Co. KG PlugIn anzeigenHerunterladenVideo
Video 01.01.00 Recording of video data in IPEmotion from USB and IP web cams with the Real Time Streaming Protocol. Vendor: IPETRONIK GmbH & Co. KG PlugIn anzeigenHerunterladen
WAGO 01.03.01 Configuration and data acquisition via Ethernet TCP/IP field bus couplers for digital and analog signals. Vendor: IPETRONIK GmbH & Co. KG PlugIn anzeigenHerunterladen
WAGO PLC 01.00.00 Controller programming via CODESYS PLC software. IPEmotion imports the process image (IO teminals, variables) from the controller. Read / Write access to channel variables. Modifying the channel configuration is not supported. PlugIn is licensed. Vendor: LEDVANCE PlugIn anzeigenHerunterladen
Yokogawa 01.00.00 Data recording of current, volt and power and many characteristics from power analyzers. Vendor: IPETRONIK GmbH & Co. KG PlugIn anzeigenHerunterladenVideo

Meta Navigation DE