IPEmotion PlugIns

IPETRONIK PlugIns

  • PlugIn:

    IPETRONIK-CAN

    Version: 01.16.01
    Beschreibung:
    Configuration and data acquisition (TEDS, Strain, ICP, Volt, High Voltage, mA, RTD, TC, DIO, PWM, Encoder) of the IPETRONIK CAN modules.
  • PlugIn:

    IPETRONIK-LOG

    Version: 03.62.00
    Beschreibung:
    Configuration and data acquisition for all IPETRONIK data logger series and add on modules like: Video Extender, FlexRay Extender, COM gate etc…
  • PlugIn:

    IPETRONIK-X

    Version: 02.07.01
    Beschreibung:
    Configuration and data acquisition using IPETRONIK X-LINK and CAN devices. (TEDS, Strain gage, ICP, Voltage, Current, RTD, TC, DIO, PWM, Encoder) Firmware requirements: X-Series V2.x, M-Series V4.0 Vendor IPETRONIK GmbH & Co. KG

Other PlugIns

PlugIn Version Description Links
BECKHOFF 01.05.00 Configuration and data acquisition of Beckhoff TCP/IP field bus couplers with K bus terminals. Interfacing to TwinCAT PLCs based on EtherCAT EL-terminals is also supported. Vendor: IPETRONIK GmbH & Co. KG View PlugInDownload
CAETEC dataLog PlugIn 15.10.00 The CAETEC dataLog PlugIn is supporting the configuration of µCROS and Arcos 1.5 product lines. Vendor: IPETRONIK View PlugInDownload
CAN-Acquisition 01.06.00 Direct data acquisition from ECU (Electronic Control Unit) via CAN bus. The signal configuration files are imported to IPEmotion via CANdb or Autosar files. CANdb and XML CANdb exports are supported, as well. Vendor: IPETRONIK GmbH & Co. KG View PlugInDownload
CAN-Send 01.02.00 Sending CAN message to stimulate CAN controllers and ECUs, or other software packages suitable for CAN communication. Configuration via .DBC and Autosar files. Vendor: IPETRONIK GmbH & Co. KG View PlugInDownload
Dataforth 01.02.04 Configuration and data acquisition of the MAQ20 COM4 interface including all IO modules. The supported device interfaces are USB and Ethernet TCP/IP. Vendor: Dataforth Corporation View PlugInDownload
Demo-Signals 01.05.00 Generating different wave forms. Suitable for software demos without any DAQ hardware. Vendor: IPETRONIK GmbH & Co. KG View PlugInDownload
EASYBus 01.05.03 Data recording with the Easybus devices from Greisinger. Vendor: IPETRONIK GmbH & Co. KG View PlugInDownload
ETH 01.01.00 Send and receive ASCII data records via the UDP or TCP protocol. The specific AK protocol for the data communication to MAHA Roller test benches is also implemented. Vendor: IPETRONIK GmbH & Co. KG View PlugInDownload
Excel Add-In 04.00.00 The IPEmotion Excel Add-In is an Add-In to Microsoft Excel 2010 and later versions. It allows to open IPEmotion IAD files with Excel directly. The Excel table fills with the channel information and channel values contained in the IAD file. Vendor: IPETRONIK GmbH & Co. KG View PlugInDownload
GANTNER-INSTRUMENTS 01.00.15 Device configurations can be automatically detected. To modify the device configuration, the testCommander software is needed. Vendor: Gantner Instruments GmbH View PlugInDownloadVideo
Goldammer 01.01.00 Data acquisition boards for dynamic applications. The boards support many real-time functions with one exception of the on board FFT calculation. Automatic Hardware detection is implemented. Vendor: Goldammer GmbH View PlugInDownloadVideo
GPS 01.05.00 Recording GPS data based on the NMEA standard protocol. Vendor: IPETRONIK GmbH & Co. KG View PlugInDownload
HBM-QuantumX 01.00.00 Configuration and data acquisition of the 8-channel universal signal conditioning unit for Current, Volt, RTD, Thermocouple and Strain Gauge measurement. Vendor: IPETRONIK GmbH & Co. KG View PlugInDownload
INNOVA-Gas-Monitor-1412 01.00.00 Data recording of CO2, flow and temperatures from the photo acoustic gas monitor device. Vendor: IPETRONIK GmbH & Co. KG View PlugInDownload
IOtech 01.00.01 Device configuration and data acquisition of DaqBook 2000 series devices and IO modules. The PlugIn also requires the IOtech DATACom device driver. Vendor: IPETRONIK GmbH & Co. KG View PlugInDownloadVideo
IPEsensors 01.01.00 Configuration and data acquisition with IPETRONIK CAN bus devices IPElambda and IPEspeed. View PlugInDownload
IPETRONIK-CAN 01.16.01 Configuration and data acquisition (TEDS, Strain, ICP, Volt, High Voltage, mA, RTD, TC, DIO, PWM, Encoder) of the IPETRONIK CAN modules. View PlugInDownload
IPETRONIK-FlexRay-Extender 01.00.00 FlexRay singal based measurement via the IPETRONIK FlexRay extender View PlugInDownload
IPETRONIK-LOG 03.62.00 Configuration and data acquisition for all IPETRONIK data logger series and add on modules like: Video Extender, FlexRay Extender, COM gate etc… View PlugInDownload
IPETRONIK-X 02.07.01 Configuration and data acquisition using IPETRONIK X-LINK and CAN devices. (TEDS, Strain gage, ICP, Voltage, Current, RTD, TC, DIO, PWM, Encoder) Firmware requirements: X-Series V2.x, M-Series V4.0 Vendor IPETRONIK GmbH & Co. KG View PlugInDownload
NI-DAQmx 01.01.00 Channel configuration and data recording of the National Instruments USB DAQmx devices. Automatic hardware detection via USB interface is supported. The DAQmx device driver library is also needed. Vendor: IPETRONIK GmbH & Co. KG View PlugInDownloadVideo
OPTRIS 01.00.00 Integrating OPTRIS PI infrared thermal imaging cameras. PI Series: 160, 200, 400, 450, 640. PlugIn is licensed. Vendor: PMR Handels GmbH View PlugInDownload
OSRAM OPC 00.00.05 Integration of variables (reading and writing) with the OPC DA interface. The PlugIn operates as OPC slave. PlugIn is licensed. Vendor: LEDVANCE View PlugInDownload
PLIN 02.01.00 LIN bus measurement with configuration as master, slave or listener. Signals are imported via .LDF description file. Vendor: IPETRONIK GmbH & Co. KG View PlugInDownload
PROFIBUS 01.01.00 Access to the Profibus PLC network where the PlugIn can perform its actions as master or slave. Vendor: IPETRONIK GmbH & Co. KG View PlugInDownload
Protocols 01.08.00 Data acquisition from ECU based on XCP, CCP, KWP and GM-LAN protocol. This PlugIn is supporting the standardized measurement of OBD-2 (On Board Diagnostic) signals, as well. Vendor: IPETRONIK GmbH & Co. KG View PlugInDownload
SCALES 01.00.00 Serial communication to weighing devices. Vendor: IPETRONIK GmbH & Co. KG View PlugInDownload
Serial 01.01.00 Reading data from any serial devices. The PlugIn provides the framework for ny devices specific DLL to handle data communication. Vendor: IPETRONIK GmbH & Co. KG View PlugInDownloadVideo
SIEMENS-PLC 01.05.00 Access to Siemens S7 automation systems though different interfaces. Configurations can be created by importing *s7p project files in order to select the variables of interest. Vendor: IPETRONIK GmbH & Co. KG View PlugInDownloadVideo
Sound 01.02.00 Recording the sound signal from the PC microphone. Vendor: IPETRONIK GmbH & Co. KG View PlugInDownload
Status 01.00.00 Recording of single process variables and system variables such as CPU load and storage. Vendor: IPETRONIK GmbH & Co. KG View PlugInDownload
Technikmedia-ATMEL 01.01.02 The PlugIn supports data communication to the analog and digital processor IOs together with the ATMEL program. Vendor: IPETRONIK GmbH & Co. KG View PlugInDownloadVideo
Technikmedia-AvrNetIO 01.00.02 Experimental board from Pollin with an Ethernet interface. The K8 relay card with all IOs is included in the PlugIn. Vendor: IPETRONIK GmbH & Co. KG View PlugInDownloadVideo
Technikmedia-MODBUS 01.01.12 Interfacing any Modbus device using either RTU (serial) or TCP (LAN) interfaces. Supporting many function codes for setting and reading registers. PlugIn is licensed. Vendor: Technikmedia Ingenieurbüro View PlugInDownload
Velleman 02.01.00 K8055 / VM110N evaluation board. Automatic hardware detection over the USB port. All IO functions are supported. Vendor: IPETRONIK GmbH & Co. KG View PlugInDownloadVideo
Video 01.01.00 Recording of video data in IPEmotion from USB and IP web cams with the Real Time Streaming Protocol. Vendor: IPETRONIK GmbH & Co. KG View PlugInDownload
WAGO 01.03.01 Configuration and data acquisition via Ethernet TCP/IP field bus couplers for digital and analog signals. Vendor: IPETRONIK GmbH & Co. KG View PlugInDownload
WAGO PLC 01.00.00 Controller programming via CODESYS PLC software. IPEmotion imports the process image (IO teminals, variables) from the controller. Read / Write access to channel variables. Modifying the channel configuration is not supported. PlugIn is licensed. Vendor: LEDVANCE View PlugInDownload
Yokogawa 01.00.00 Data recording of current, volt and power and many characteristics from power analyzers. Vendor: IPETRONIK GmbH & Co. KG View PlugInDownloadVideo

Meta Navigation EN